Thursday, September 22, 2011

How to set ‘Enable Editing’ option in Office 2010


How to set ‘Enable Editing’ option in Office 2010
The new Office 2010 product suite for Windows boasts some new and occasionally frustrating security default settings.  In our environment, where we are working off of lab network drives and Pangea on a daily basis, one particular setting is that of ‘Trusted Documents’ located in the Trust Center.  The default behavior is to ask the user whether or now to enable editing for documents opened from a network drive such as Pangea.  You could just click on the ‘Enable Editing’ button each time – but this gets old after a bit.  So, feel free to change the following setting which will set those document types as ‘trusted.’
First, you will need to get into the Word (as shown) PowerPoint or Excel ‘Options’ – NOTE: Excel and PowerPoint (and others) follow the same directions.  Click on the ‘File’ tab and then on the ‘Options’ button:

Next, you will click on the ‘Trust Center’ option on the left side, and then on the ‘Trust Center Settings’ button on the right. (Click on the image below to enlarge)
Finally, you will need to select the ‘Protected View’ option on the left, and then uncheck the box for ‘Enable Protected View for files originating from the Internet.


Windows7 login error "The User Profile Service failed the logon. User profile cannot be loaded”, when logging on to Windows 7 or Windows Vista


"The User Profile Service failed the logon. User profile cannot be loaded”, when logging on to Windows 7 or Windows Vista

1. Click Start
2. In Start Search (Windows Vista) or Search programs and files (Windows 7) area, type in regedit, and press Enter.
3. If prompted by UAC, click Continue (Windows Vista) or Yes (Windows 7).
4. In Registry Editor, go to:
5. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
   In the left pane, look for the folder name starting with S-1-5 (SID key) followed by a long number. then click each folder and locate ProfileImagePath from the right pane, double click to verify that this is the user account profile that has the error. 

If you have tow folders starting with S-1-5 followed by same long nubmers and one of them ended with .bak. Change the .bak folder to normal one. To do this, follow the steps below:
a. Right click the folder without .bak and choose Rename. Then add .ba at the end of the folder name.
b. Right click the folder with .bak and choose Rename. Then remove .bak at the end of the folder name.

c. Right click the folder with .ba and choose Rename. Then change the .ba to .bak at the end of the folder name.


If you have only one folder starting with S-1-5 followed by a long numbers and ended with .bak. Right click the folder and choose Rename. Then remove .bak at the end of the folder name.

6. Choose the folder without .bak, in the right pane, double click RefCount and type 0 and then click OK.
7. Close Registry Editor.
8. Restart the computer.
9. Log on again with your account.

Wednesday, September 21, 2011

An invalid server name was specified.' or 'Remote Desktop Connection ActiveX control could not be installed. A connection cannot be made without a working installed version of the control. Please contact the server administrator. IE Error


An invalid server name was specified.' or 'Remote Desktop Connection ActiveX control could not be installed. A connection cannot be made without a working installed version of the control. Please contact the server administrator. IE Error

Solution for this is the following. 
1. Open Microsoft Internet Explorer.
2. Click Tools.
3. Click Internet Options.
4. Click on the Programs tab.
5. Click Manage add-ons.
6. Look for and select "Microsoft Terminal Services Client Control (redist)".
(Note - if the Microsoft option is not available in the current view, click on the drop-down menu and choose "All Add-Ons")
7. Ensure that Enable is checked.
8. Click OK if prompted with an "Add-on Status" window.
9. Click OK.
10. Close Microsoft Internet Explorer.
11. Retry connecting to Centrally Hosted MIS.
 
If the above does not resolve the issue please try the following solution:
 
1. Download  Remote Desktop Connection 7.0 client update from Microsoft
2. Click Run.
3. Click Run again, if prompted.
4. Click Next.
5. Agree to the License Agreement and click Next.
6. Click Finish.
7. Reboot your computer.
8. Retry connecting to Centrally Hosted MIS.

How to Fix ‘Open in New Tab/Window’ problem in IE8 ?


How to Fix ‘Open in New Tab/Window’ problem in IE8 ?
There is a bug detected in Microsoft Internet Explorer 8, which creates problem to open links in a new tab or a new window. This issue occurs when a user right-clicks a web link/address on a web page, and then click [Open in New Window] or [Open in New Tab]. This bug makes the web page cannot be opened in a new window/tab.


This is caused due to some registry problems occurred, when the program doesn’t get installed properly. To resolve this issue, follow the below steps: 
1.  Go to Start > Run, type cmd and click ok.
2.  In cmd window, type regsvr32 actxprxy.dll and enter it.


3.  Now you will receive the following message: DllRegisterServer in actxprxy.dll succeeded. Click Ok

4.  Restart your computer.

The issue will be Resolved.

Still the issue not fixed. Try the following solution

Re-register the DLL files that are related to Internet Explorer. To do this, follow these steps:
1.  Click Start, and then click Run
2.  Type regsvr32 urlmon.dll in the Open box, and then click OK.
3.  Click OK when you receive the following message:
DllRegisterServer in urlmon.dll succeeded
4.  Repeat steps 1 through 3 for the rest of the DLL files by replacing the regsvr32 urlmon.dll command in the Open box with the following commands:
regsvr32 actxprxy.dll
regsvr32 shdocvw.dll
regsvr32 mshtml.dll
regsvr32 browseui.dll
regsvr32 jscript.dll
regsvr32 vbscript.dll 
regsvr32 oleaut32.dll
Now your IE8 Open in New Window/Tab feature, should work simply fine.
OR

Download this attached registry file and run it. Click ‘Yes’ when dialog box appears to add it to Windows registry

system performance is slow, system is dead slow, system hangs frequently : Solution

system performance is slow, system is dead slow, system hangs frequently : Solution

To Resolve the problem

1. Remove unwanted startup items from MSCONFIG or Delete the strings except Symantec ones from registry paths below,

"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run"
"HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run"

2. Check the Bad sectors and blocks in hard disk and run scandisk and Checkdisk to fix bad sectors.

3. Check for the cache memory size which should be more than 1 1/2 of the actual RAM size.
Enable large system cache and disable swap file creation from registry key, Set the values as shown

"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management"
DisablePagingExecutive 1
LargeSystemCache 1

4. Stop unwanted services and check if any third party softwares updates creating the problem in slow performance.

Not Prompting Specific Download Folder for File in Internet Explorer8, IE8 while downloading a file.

Not Prompting Specific Download Folder for File in Internet Explorer8, IE8 while downloading a file.

Need to edit the registry in order to reset the Open/Save choice made
earlier in Internet Explorer.

1. Click Start, type Regedit.exe and press ENTER

2. Navigate to the following branch:

HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ Shell \
AttachmentExecute \ {0002DF01-0000-0000-C000-000000000046}

3. In the right-pane, right-click on the appropriate entry and choose Delete

4. Exit the Registry Editor

"Could not create the scheduled task for the following reason: Cannot create a file when that file already exists. (0x800700B7)." system restore error


Unable to Toggle System Restore or Create a restore point because of this error (Vista):

"Could not create the scheduled task for the following reason: Cannot create a file when that file already exists. (0x800700B7)."

Cause: The Task Scheduler engine is out of synch with the currently configured tasks.

Fix:

1) Open Regedit.exe

2) Navigate to this key:

a. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows\SystemRestore\SR

b. Find the “ID” String and copy that information down. You will need it for next steps.




3) Export & Delete the SystemRestore key:

a. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows\SystemRestore

4) Navigate to this key:

a. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache

5) Find the “ID” key by performing a search:




6) Export & Delete the key whose name matches the copied “ID” string from Step 2b.


7) Open an Elevated Cmd Prompt

8) Navigate to this folder:

a. %windir%\System32\Tasks\Microsoft\Windows\SystemRestore

9) Delete the file named “SR” from the folder

10) Reboot

11) Try to Toggle the System Restore now and create a restore point.

Outlook not starting, Outlook 2007 hangs at splash screen when attempting to run normally, but it will open when ran in Outlook safe mode.

The Error: Outlook 2007 hangs at splash screen when attempting to run normally, but it will open when ran in Outlook safe mode.

Reson : This might be due to a problem with Outlook and Windows Search.

The Solution :
1. Start -> Run -> services.msc (Type) and press enter.

2. Select any of the service and press the key 'W' and scroll nearly to the bottom of the list and highlight Windows Search.

3. Right click and select properties.

4. Change the Startup Type to “Disabled”.

5. Reboot the system.

6. Start Outlook as normal. If the you are prompted again for running in Safe Mode select No and see if Outlook runs as normal

“You must restart your computer before installing McAfee products”. McAfee installation error in Windows

The error: “You must restart your computer before installing McAfee products” while installing McAfee Products

By doing the below steps you can solve this issue

Open Regedit (Start -> Run -> regedit

HKLM\Software\Microsoft\Windows\CurrentVersion\RunOnce

If there is a value named "UninstRebootRequired" then delete it.

Check C:\Documents and Settings\All Users\Start Menu\Programs\Startup for a file named "$McRebootA5E6DEAA56$". If it is there delete it.

It might be here "C:\ProgramData\Microsoft\Windows\Start Menu" or here "C:\Users\Default\AppData\Roaming\Microsoft\Windows\Start Menu"


No need to Reboot, reinstall the application.

internal error: failed to expand shell folder constant "userappdata" error while installing a programin Windows XP

Error showing while installing a program or application in Windows XP "internal error: failed to expand shell folder constant "userappdata"

Reson for this error is the appdata value contains incorrect information

By doing the below step we can solve this problem

Go to Start -> Run -> Regedit and go to the path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\

AppData = %USERPROFILE%\AppData\Roaming

Set AppData as: %APPDATA%.

Reinstall the program.

The form required to view this message cannot be displayed. Contact your administrator error in outlook 2007 outlook 2010

Solution for the error "The form required to view this message cannot be displayed. Contact your administrator" in outlook calendar 2007, 2010

Clearing the forms cache
The first thing you should try is clearing the forms cache. This will make sure that, in the case of using a custom form, the latest published version of your custom forms gets loaded again.

How to clear the cache ;

* Outlook 2007 and previous
Tools-> Options…-> tab Other-> button Advanced Options…-> button Custom Forms…-> button Manage Forms…-> button Clear Cache

* Outlook 2010
File-> section Options-> section Advanced-> group Developers-> button Custom Forms…-> button Manage Forms…-> button Clear Cache

When you want to clear it manually, delete all contents from the following directory when Outlook is close;

* Windows XP
C:\Documents and Settings\%username%\Local Settings\Application Data\Microsoft\FORMS
* Windows Vista and Windows 7
C:\Users\%username%\AppData\Local\Microsoft\FORMS
And then restart Outlook.

If you still have this issue after clearing the forms cache, make sure that Outlook is configured to open the correct form when creating a new item in that folder. To see which form is the default, right click on each of the Team Helpdesk folder and choose Properties. Here you’ll find a drop down list called “When posting to this folder, use:”. Making sure the following are matched;

Blue Screen in Lenovo Laptops solution

If user is getting Blue Screen error and uses Lenovo Laptop please try the below troubleshooting step to solve the problem before proceeding with any other steps. 1)Restart The system and keep on pressing F1 button to login to BIOS Mode. Please select config option in BIOS


2)Kindly select Serial ATA(SATA)

3)Please check the below setting is enabled or not if not please enable the below setting

4) Click F10 button to Save the configuration Setting


Restart the system and check the problem . Most of the time Blue screen will come for the above setting is not enabled in the system

The disk in the destination drive is full, please insert a new disk to continue?

Please find the below steps to solve the issue when you get the error message “The disk in the destination drive is full, please insert a new disk to continue?”

Right Click USB > Properties > Hardware TAB > find your USB or general USB flash disk usb device , Double Click it > Go Policies TAB select Optimize for performance > Click Ok

 Right click on USB Select Format option à In File System Select “NTFS” > Click Start. Once the format is completed try to copy the data 100% it will work.


How to do hard reset in blackberry - BB synchronisation issues

Hard Reset

*Remove battery without switching handset off
*Take SIM out
*Leaving SIM out, put battery back in and switch handset on (wait until phone displays “No SIM”)
*Take battery out again without switching off
*Put it all back together
*Switch on.

Sunday, September 4, 2011

Outlook Name cache not getting saved or Outlook Name cache not working in Outlook 2010

Outlook Name cache not getting saved or Outlook Name cache not working in Outlook 2010
1. Close all office application including the office communicator if open.
2. Go to the below path and remove the file name Stream_Autocomplete_x_xxxxxx.dat which has more size. Don’t delete it but move it to a different folder like desktop.
Windows XP:- C:\Documents and Settings\\Local Settings\Application Data\Microsoft\Outlook\RoamCache
Windows 7:- C:\Users\<user profile>\AppData\Local\Microsoft\Outlook\RoamCache
3. Copy the attached file to user machine to the above mentioned location.
4. Rename this file name to the same name of the file which is moved out of this location.
5. Go to the below path and rename the NK2 file from outlookprofilename.NK2.Old to outlookprofilename.Nk2
C:\Documents and Settings\\Application Data\Microsoft\Outlook
C:\Users\<user profile>\AppData\Roaming\Microsoft\Outlook\
6. Go to Run and type outlook /importNK2.
Note:- This solution will work only if the office 2010 is installed on a up-gradation base.

How to reset the BlackBerry smartphone to factory defaults

How to reset the BlackBerry smartphone to factory defaults

To reset a BlackBerry® smartphone to factory defaults, complete the following steps:

Warning: Back up the data from the BlackBerry smartphone to a computer. For assistance with backing up data on the BlackBerry smartphone, see KB12487.

On a 32-bit Windows XP to Windows 7 operating system (OS), complete the following steps:

  1. Connect the smartphone to the computer.
  2. On the computer, click Start > Programs > Accessories > Command Prompt. (Note: For Windows Vista® and Windows® 7, right-click and run as Administrator.)
  3. Type cd C:\Program Files\Common Files\Research In Motion\Apploader and press ENTER.
  4. Type loader.exe /resettofactory and press ENTER.

Note: For steps to perform this function within the BlackBerry® Desktop Software's graphical interface, see KB27243

On a 64-bit Windows XP or Windows 7 OS, complete the following steps:

  1. Connect the smartphone to the computer.
  2. On the computer, click Start > Programs > Accessories > Command Prompt. (Note: For Windows Vista and Windows 7, right-click and run as Administrator.)
  3. Type cd C:\Program Files (x86)\Common Files\Research In Motion\Apploader and press ENTER.
  4. Type loader.exe /resettofactory and press ENTER.

Note: For steps to perform this function within the BlackBerry Desktop Software's graphical interface, see KB27243

Note: BlackBerry® Desktop Software 4.7 to 6.0 must be installed on the computer. The BlackBerry smartphone must be running BlackBerry® Device Software 4.3 to 6.0.

http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB18998

unexpected error occurred. please try again later RMS issue in outlook

Alternative ways of checking machine model & serial number if sticker below laptop is unreadable

Alternative ways of checking machine model & serial number if sticker below laptop is unreadable

You can check your machine serial number through a few methods:

  1. Bios
  2. Lenovo ThinkVantage Toolbox
  3. Lenovo Warranty Look-up Page

Method 1: Bios

  1. Go into BIOS...I don't know what it looks like on X301, but should state something like "unit serial number".
  2. The first seven characters are your model number (like 2373KTU) and the rest is the actual serial (L3878PC9 for instance)

Method 2: Lenovo ThinkVantage Toolbox

  1. You can look that up in Lenovo ThinkVantage Toolbox in Windows.
  2. If you do not have this tool, download it from http://www.lenovo.com/support site.

Description: LTT.jpg


Method 3: Lenovo Warranty Look-up Page

  1. Use Internet Explorer 6 and above to browse to Lenovo Warranty Look Up page.
  2. Click on Auto-Detect and you'll be directed to a page with your warranty status along with your machine serial number
  3. You can check your machine serial number through a few methods:BiosLenovo ThinkVantage ToolseSupport Warranty Look-up Page

Internal program error:.\Src\IntegrationToolsHolder.cpp,21 runtime error in XP almost every time I right click to get a menu to do something such as

Internal program error:.\Src\IntegrationToolsHolder.cpp,21 runtime error in XP almost every time I right click to get a menu to do something such as Delete or Copy..

Reason:

Due to the (Sprint.ExplorerIntegration.9 )Class Identifier which was modified by ABBYY Fine Reader

Resolution

Download ShellExView from here to see which Explorer extensions you have loaded:

http://www.nirsoft.net/utils/shexview.html

ShellExView doesn't install anything on your computer, it just runs and displays.

Run the ShellExView extension manager and disable Sprint.ExplorerIntegration.9 class Identifier, by just doing a right click and disable . Reboot the machine once done and everything should work fine

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Powered by Blogger